MATERIAL HANDLING HOSE

GUNITE

Application

For conducting dry sand and cement in guniting operations. Also for general material handling applications where a thick cut and abrasion resistant tube is required.

Construction

Tube- Tan natural rubber for maximum cut and abrasion resistant 1/4" thick
Reinforcement- Two layers of synthetic textile cords with static wire
Cover- Black abrasion and weather resistant synthetic rubber
Branding- Unbranded

Temperature Range

-35°C to +82°C (-31°F to +180°F)

Standard Lengths

1.25" to 1.625" - 50ft / 100ft
2" to 3" - 50ft / 100ft
 
Parts No.
I.D. Inches
O.D. Inches
Max W.P. @ 70°F/20°C
Approx. Wt. Per. Ft. Lbs.
G-1.25 1-1/4 2.09 150 1.160
G-1.5 1-1/2 2.33 150 1.330
G-1.625 1-5/8 2.46 150 1.430
G-2 2 2.88 150 1.780
G-3 3 3.86 150 2.670
Working pressures are calculated at 70 degrees F (20 degrees C). Maximum working pressure decreases as temperature increases. Pressure ratings can only be achieved using proper coupling procedures. Bend radius is calculated at 70 degrees F (20 degrees C). Flexibility may vary at different temperatures. Please contact IRP if you have concerns regarding your application.